Search results for the GEO ID: GSE10410 |
(Click on the check boxes provided under "Select for analysis", to initiate grouping) |
(Once the selection is made, click on "Add groups" in "Make groups for comparison", to make a group. Scroll down) |
|
GSM ID | GPL ID |
Select for analysis |
Title |
Source name |
Description |
Characteristics |
GSM263012 | GPL570 |
|
H438 DMSO 0.001
|
H438 DMSO 0.001
|
primary hepatocytes
|
H438 DMSO 0.001.CEL
|
Sample_geo_accession | GSM263012
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263012/suppl/GSM263012.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263013 | GPL570 |
|
H448 DMSO 0.001
|
H448 DMSO 0.001
|
primary hepatocytes
|
H448 DMSO 0.001.CEL
|
Sample_geo_accession | GSM263013
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263013/suppl/GSM263013.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263014 | GPL570 |
|
H439 DMSO 0.001
|
H439 DMSO 0.001
|
primary hepatocytes
|
H439 DMSO 0.001.CEL
|
Sample_geo_accession | GSM263014
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263014/suppl/GSM263014.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263015 | GPL570 |
|
H416 DMSO 0.001
|
H416 DMSO 0.001
|
primary hepatocytes
|
H416 DMSO 0.001.CEL
|
Sample_geo_accession | GSM263015
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263015/suppl/GSM263015.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263016 | GPL570 |
|
H438 Myclobutanil 10uM
|
H438 Myclobutanil 10uM
|
primary hepatocytes
|
H438 Myclobutanil 10uM.CEL
|
Sample_geo_accession | GSM263016
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263016/suppl/GSM263016.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263017 | GPL570 |
|
H439 Myclobutanil 10uM
|
H439 Myclobutanil 10uM
|
primary hepatocytes
|
H439 Myclobutanil 10uM.CEL
|
Sample_geo_accession | GSM263017
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263017/suppl/GSM263017.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263018 | GPL570 |
|
H416 Myclobutanil 10uM
|
H416 Myclobutanil 10uM
|
primary hepatocytes
|
H416 Myclobutanil 10uM.CEL
|
Sample_geo_accession | GSM263018
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263018/suppl/GSM263018.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263019 | GPL570 |
|
H416 Myclobutanil 30uM
|
H416 Myclobutanil 30uM
|
primary hepatocytes
|
H416 Myclobutanil 30uM.CEL
|
Sample_geo_accession | GSM263019
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263019/suppl/GSM263019.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263020 | GPL570 |
|
H438 Myclobutanil 30uM
|
H438 Myclobutanil 30uM
|
primary hepatocytes
|
H438 Myclobutanil 30uM.CEL
|
Sample_geo_accession | GSM263020
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263020/suppl/GSM263020.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263021 | GPL570 |
|
H439 Myclobutanil 30uM
|
H439 Myclobutanil 30uM
|
primary hepatocytes
|
H439 Myclobutanil 30uM.CEL
|
Sample_geo_accession | GSM263021
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263021/suppl/GSM263021.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263022 | GPL570 |
|
H438 Myclobutanil 100uM
|
H438 Myclobutanil 100uM
|
primary hepatocytes
|
H438 Myclobutanil 100uM.CEL
|
Sample_geo_accession | GSM263022
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263022/suppl/GSM263022.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263023 | GPL570 |
|
H448 Myclobutanil 100uM
|
H448 Myclobutanil 100uM
|
primary hepatocytes
|
H448 Myclobutanil 100uM.CEL
|
Sample_geo_accession | GSM263023
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263023/suppl/GSM263023.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263024 | GPL570 |
|
H439 Myclobutanil 100uM
|
H439 Myclobutanil 100uM
|
primary hepatocytes
|
H439 Myclobutanil 100uM.CEL
|
Sample_geo_accession | GSM263024
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263024/suppl/GSM263024.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263025 | GPL570 |
|
H416 Myclobutanil 100uM
|
H416 Myclobutanil 100uM
|
primary hepatocytes
|
H416 Myclobutanil 100uM.CEL
|
Sample_geo_accession | GSM263025
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263025/suppl/GSM263025.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263026 | GPL570 |
|
H133+_H416_PB_1000uM
|
H133+_H416_PB_1000uM
|
primary hepatocytes
|
H133+_H416_PB_1000uM.CEL
|
Sample_geo_accession | GSM263026
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263026/suppl/GSM263026.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263027 | GPL570 |
|
H133+_H448_PB_1000uM
|
H133+_H448_PB_1000uM
|
primary hepatocytes
|
H133+_H448_PB_1000uM.CEL
|
Sample_geo_accession | GSM263027
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263027/suppl/GSM263027.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263028 | GPL570 |
|
H438 PB 1000uM
|
H438 PB 1000uM
|
primary hepatocytes
|
H438 PB 1000uM.CEL
|
Sample_geo_accession | GSM263028
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263028/suppl/GSM263028.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263029 | GPL570 |
|
H439 PB 1000uM
|
H439 PB 1000uM
|
primary hepatocytes
|
H439 PB 1000uM.CEL
|
Sample_geo_accession | GSM263029
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263029/suppl/GSM263029.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263030 | GPL570 |
|
H133+_H439_Propi_10uM
|
H133+_H439_Propi_10uM
|
primary hepatocytes
|
H133+_H439_Propi_10uM.CEL
|
Sample_geo_accession | GSM263030
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263030/suppl/GSM263030.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263031 | GPL570 |
|
H133+_H448_Propi_10uM
|
H133+_H448_Propi_10uM
|
primary hepatocytes
|
H133+_H448_Propi_10uM.CEL
|
Sample_geo_accession | GSM263031
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263031/suppl/GSM263031.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263032 | GPL570 |
|
H438 Propiconazole 10uM
|
H438 Propiconazole 10uM
|
primary hepatocytes
|
H438 Propiconazole 10uM.CEL
|
Sample_geo_accession | GSM263032
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263032/suppl/GSM263032.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263033 | GPL570 |
|
H416 Propiconazole 10uM
|
H416 Propiconazole 10uM
|
primary hepatocytes
|
H416 Propiconazole 10uM.CEL
|
Sample_geo_accession | GSM263033
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263033/suppl/GSM263033.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263034 | GPL570 |
|
H133+_H416_Propi_30uM
|
H133+_H416_Propi_30uM
|
primary hepatocytes
|
H133+_H416_Propi_30uM.CEL
|
Sample_geo_accession | GSM263034
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263034/suppl/GSM263034.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263035 | GPL570 |
|
H133+_H448_Propi_30uM
|
H133+_H448_Propi_30uM
|
primary hepatocytes
|
H133+_H448_Propi_30uM.CEL
|
Sample_geo_accession | GSM263035
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263035/suppl/GSM263035.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263036 | GPL570 |
|
H438 Propiconazole 30uM
|
H438 Propiconazole 30uM
|
primary hepatocytes
|
H438 Propiconazole 30uM.CEL
|
Sample_geo_accession | GSM263036
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263036/suppl/GSM263036.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263037 | GPL570 |
|
H439 Propiconazole 30uM
|
H439 Propiconazole 30uM
|
primary hepatocytes
|
H439 Propiconazole 30uM.CEL
|
Sample_geo_accession | GSM263037
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263037/suppl/GSM263037.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263038 | GPL570 |
|
H133+_H439_Propi_100uM
|
H133+_H439_Propi_100uM
|
primary hepatocytes
|
H133+_H439_Propi_100uM.CEL
|
Sample_geo_accession | GSM263038
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263038/suppl/GSM263038.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263039 | GPL570 |
|
H133+_H416_Propi_100uM
|
H133+_H416_Propi_100uM
|
primary hepatocytes
|
H133+_H416_Propi_100uM.CEL
|
Sample_geo_accession | GSM263039
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263039/suppl/GSM263039.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263040 | GPL570 |
|
H438 Propiconazole 100uM
|
H438 Propiconazole 100uM
|
primary hepatocytes
|
H438 Propiconazole 100uM.CEL
|
Sample_geo_accession | GSM263040
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263040/suppl/GSM263040.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263041 | GPL570 |
|
H448 Propiconazole 100uM
|
H448 Propiconazole 100uM
|
primary hepatocytes
|
H448 Propiconazole 100uM.CEL
|
Sample_geo_accession | GSM263041
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263041/suppl/GSM263041.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263042 | GPL570 |
|
H133+_H439_Rif_30uM
|
H133+_H439_Rif_30uM
|
primary hepatocytes
|
H133+_H439_Rif_30uM.CEL
|
Sample_geo_accession | GSM263042
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263042/suppl/GSM263042.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263043 | GPL570 |
|
H448 Rif 30uM
|
H448 Rif 30uM
|
primary hepatocytes
|
H448 Rif 30uM.CEL
|
Sample_geo_accession | GSM263043
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263043/suppl/GSM263043.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263044 | GPL570 |
|
H133+_H438_Tri_10uM
|
H133+_H438_Tri_10uM
|
primary hepatocytes
|
H133+_H438_Tri_10uM.CEL
|
Sample_geo_accession | GSM263044
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263044/suppl/GSM263044.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263045 | GPL570 |
|
H133+_H416_Tri_10uM
|
H133+_H416_Tri_10uM
|
primary hepatocytes
|
H133+_H416_Tri_10uM.CEL
|
Sample_geo_accession | GSM263045
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263045/suppl/GSM263045.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263046 | GPL570 |
|
H439 Triadimefon 10uM
|
H439 Triadimefon 10uM
|
primary hepatocytes
|
H439 Triadimefon 10uM.CEL
|
Sample_geo_accession | GSM263046
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263046/suppl/GSM263046.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263047 | GPL570 |
|
H448 Triadimefon 10uM
|
H448 Triadimefon 10uM
|
primary hepatocytes
|
H448 Triadimefon 10uM.CEL
|
Sample_geo_accession | GSM263047
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263047/suppl/GSM263047.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263048 | GPL570 |
|
H133+_H439_Tri_30uM
|
H133+_H439_Tri_30uM
|
primary hepatocytes
|
H133+_H439_Tri_30uM.CEL
|
Sample_geo_accession | GSM263048
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263048/suppl/GSM263048.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263049 | GPL570 |
|
H133+_H448_Tri_30uM
|
H133+_H448_Tri_30uM
|
primary hepatocytes
|
H133+_H448_Tri_30uM.CEL
|
Sample_geo_accession | GSM263049
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263049/suppl/GSM263049.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263050 | GPL570 |
|
H438 Triadimefon 30uM
|
H438 Triadimefon 30uM
|
primary hepatocytes
|
H438 Triadimefon 30uM.CEL
|
Sample_geo_accession | GSM263050
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263050/suppl/GSM263050.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263051 | GPL570 |
|
H416 Triadimefon 30uM
|
H416 Triadimefon 30uM
|
primary hepatocytes
|
H416 Triadimefon 30uM.CEL
|
Sample_geo_accession | GSM263051
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263051/suppl/GSM263051.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263052 | GPL570 |
|
H438 Triadimefon 100uM
|
H438 Triadimefon 100uM
|
primary hepatocytes
|
H438 Triadimefon 100uM.CEL
|
Sample_geo_accession | GSM263052
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263052/suppl/GSM263052.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263053 | GPL570 |
|
H416 Triadimefon 100uM
|
H416 Triadimefon 100uM
|
primary hepatocytes
|
H416 Triadimefon 100uM.CEL
|
Sample_geo_accession | GSM263053
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263053/suppl/GSM263053.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
GSM263054 | GPL570 |
|
H448 Triadimefon 100uM
|
H448 Triadimefon 100uM
|
primary hepatocytes
|
H448 Triadimefon 100uM.CEL
|
Sample_geo_accession | GSM263054
| Sample_status | Public on Feb 07 2008
| Sample_submission_date | Feb 06 2008
| Sample_last_update_date | Feb 06 2008
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_treatment_protocol_ch1 | in vitro exposure, 72 hour exposure via medium
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | Total RNA was extracted from primary hepatocytes using TRI Reagent (Molecular Research Center Inc., Cincinnati, OH) according to the manufacturer’s protocol and subjected to quality control measures before application to microarrays. For quality control, RNA A260:A280 ratios were assessed via NanoDrop Fluorospectrometer (NanoDrop Technologies, Inc. Wilmington, DE). RNA absorbance readings with a range 1.8 – 2.1 were followed with DNase treatment, Total RNA Cleanup (Qiagen RNeasy), and then checked for RNA quality using the model 2100 Bioanalyzer (Agilent Technologies Inc., Palo Alto, CA). Those samples with a ratio of 28S:18S rRNA >1.6 were accepted for subsequent use in DNA microarrays. RNA was stored at -80ºC until labeling for microarray hybridization.
| Sample_label_ch1 | biotin
| Sample_label_protocol_ch1 | Five micrograms or purified total RNA from each sample per treatment group was hybridized to Affymetrix GeneChip® Human Genome U133_2.0 Plus microarrays according to the Affymetrix GeneChip Expression Analysis Technical Manual (www.affymetrix.com). Briefly, after purified RNA passed quantity and quality assessment, double stranded cDNA was synthesized from RNA using reverse transcriptase and an oligo-dT primer. Biotinylated RNA (labeled cRNA) served as the microarray target. cRNA was fragmented using heat and magnesium (Mg+2) reducing the cRNA to 25-200 base fragments to facilitate efficient and reproducible hybridization.
| Sample_hyb_protocol | cRNA was combined with the hybridization cocktail, containing 3nM B2 control oligo, 10 mg/ml Herring Sperm DNA, 50 mg/ml BSA, 100% DMSO, and 2X hybridization buffer (NaCL 5M, MES hydrate Sigma Ultra, MES Sodium Salt, EDTA Disodium Salt 0.5M, 10% Tween-20). GeneChips were hybridized at 45ºC for 16 h. After hybridization the chip was washed and stained with fluorescent streptavidin-phycoerythrin, binding to biotin for detection.
| Sample_scan_protocol | Signal amplification using anti-Streptavidin antibody (goat) and biotinylated goat IgG antibody was used to bind biotin and provide an amplified fluor that emitted light when the chip is scanned with the GeneChip Scanner 3000.
| Sample_data_processing | To minimize non-biological factors, e.g. total amount of target hybridized to each array, signal values for each hybridization were multiplied by a scaling factor (SF) to get a trimmed mean intensity equal to 500. Converted .cel files were loaded into JMP Genomics (SAS Inc., Cary, NC), Log2 transformed, normalized using interquartile normalization, and analyzed for significant changes in transcript levels through row-by-row modeling using one-way ANOVA. For initial exploratory analysis, principle component analysis (PCA) was applied using JMP Genomics. Comparisons were made between controls and each treatment group with statistical cut-offs applied at a p-value adjusted false discovery rate and an absolute difference of |1.2| or greater. Probe sets representing transcribed loci, unknown genes, and image clones were removed from the final list of each analysis.
| Sample_platform_id | GPL570
| Sample_contact_name | David,,Dix
| Sample_contact_email | dix.david@epa.gov
| Sample_contact_phone | 919-541-2701
| Sample_contact_department | ORD/NCCT
| Sample_contact_institute | US EPA
| Sample_contact_address | 109 TW Alexander Drive
| Sample_contact_city | Research Triangle Park
| Sample_contact_state | NC
| Sample_contact_zip/postal_code | 27711
| Sample_contact_country | USA
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM263nnn/GSM263054/suppl/GSM263054.CEL.gz
| Sample_series_id | GSE10410
| Sample_data_row_count | 54675
| |
|
|
|
Make groups for comparisons |
(2 groups will be compared at a time) |
|
Select GSMs and click on "Add groups" |
Enter the group name here: |
|
|
|