Search results for the GEO ID: GSE6044 |
(Click on the check boxes provided under "Select for analysis", to initiate grouping) |
(Once the selection is made, click on "Add groups" in "Make groups for comparison", to make a group. Scroll down) |
|
GSM ID | GPL ID |
Select for analysis |
Title |
Source name |
Description |
Characteristics |
GSM140166 | GPL201 |
|
Adenocarcinoma A1
|
Primary lung cancer samples
|
age: 62
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140166
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140166/suppl/GSM140166.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140167 | GPL201 |
|
Adenocarcinoma A2
|
Primary lung cancer samples
|
age: 80
gender: w
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140167
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140167/suppl/GSM140167.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140168 | GPL201 |
|
Adenocarcinoma A3
|
Primary lung cancer samples
|
age: 63
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140168
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140168/suppl/GSM140168.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140169 | GPL201 |
|
Adenocarcinoma A4
|
Primary lung cancer samples
|
age: 45
gender: w
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140169
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140169/suppl/GSM140169.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140170 | GPL201 |
|
Adenocarcinoma A5
|
Primary lung cancer samples
|
age: 62
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140170
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140170/suppl/GSM140170.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140171 | GPL201 |
|
Adenocarcinoma A6
|
Primary lung cancer samples
|
age: 72
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140171
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140171/suppl/GSM140171.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140172 | GPL201 |
|
Adenocarcinoma A7
|
Primary lung cancer samples
|
age: 61
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140172
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140172/suppl/GSM140172.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140173 | GPL201 |
|
Adenocarcinoma A8
|
Primary lung cancer samples
|
age: 52
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140173
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140173/suppl/GSM140173.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140174 | GPL201 |
|
Adenocarcinoma A9
|
Primary lung cancer samples
|
age: 59
gender: w
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140174
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140174/suppl/GSM140174.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140175 | GPL201 |
|
Adenocarcinoma A10
|
Primary lung cancer samples
|
age: 59
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140175
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140175/suppl/GSM140175.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140176 | GPL201 |
|
Small Cell Lung Cancer K1
|
Primary lung cancer samples
|
age: 74
gender: m
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140176
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140176/suppl/GSM140176.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140177 | GPL201 |
|
Small Cell Lung Cancer K2
|
Primary lung cancer samples
|
age: 74
gender: m
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140177
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140177/suppl/GSM140177.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140178 | GPL201 |
|
Small Cell Lung Cancer K3
|
Primary lung cancer samples
|
age: 66
gender: w
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140178
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140178/suppl/GSM140178.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140179 | GPL201 |
|
Small Cell Lung Cancer K4
|
Primary lung cancer samples
|
age: 39
gender: w
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140179
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140179/suppl/GSM140179.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140180 | GPL201 |
|
Small Cell Lung Cancer K5
|
Primary lung cancer samples
|
age: 80
gender: w
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140180
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140180/suppl/GSM140180.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140181 | GPL201 |
|
Small Cell Lung Cancer K6
|
Primary lung cancer samples
|
age: 64
gender: w
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140181
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140181/suppl/GSM140181.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140182 | GPL201 |
|
Small Cell Lung Cancer K7
|
Primary lung cancer samples
|
age: 61
gender: m
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140182
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140182/suppl/GSM140182.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140183 | GPL201 |
|
Small Cell Lung Cancer K8
|
Primary lung cancer samples
|
age: 69
gender: m
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140183
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140183/suppl/GSM140183.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140184 | GPL201 |
|
Small Cell Lung Cancer K9
|
Primary lung cancer samples
|
age: 54
gender: w
disease: Small Cell Lung Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140184
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140184/suppl/GSM140184.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140185 | GPL201 |
|
Normal Lung Tissue N1
|
Lung samples
|
age: 74
gender: m
disease: Normal Lung Tissue
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140185
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140185/suppl/GSM140185.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140186 | GPL201 |
|
Normal Lung Tissue N2
|
Lung samples
|
age: 72
gender: m
disease: Normal Lung Tissue
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140186
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140186/suppl/GSM140186.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140187 | GPL201 |
|
Normal Lung Tissue N3
|
Lung samples
|
age: 63
gender: m
disease: Normal Lung Tissue
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140187
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140187/suppl/GSM140187.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140188 | GPL201 |
|
Normal Lung Tissue N4
|
Lung samples
|
age: 64
gender: w
disease: Normal Lung Tissue
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140188
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140188/suppl/GSM140188.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140189 | GPL201 |
|
Normal Lung Tissue N5
|
Lung samples
|
age: 76
gender: w
disease: Normal Lung Tissue
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140189
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140189/suppl/GSM140189.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140190 | GPL201 |
|
Squamous Cell Carcinoma P1
|
Primary lung cancer samples
|
age: 79
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140190
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140190/suppl/GSM140190.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140191 | GPL201 |
|
Squamous Cell Carcinoma P2
|
Primary lung cancer samples
|
age: 75
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140191
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140191/suppl/GSM140191.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140192 | GPL201 |
|
Squamous Cell Carcinoma P3
|
Primary lung cancer samples
|
age: 57
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140192
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140192/suppl/GSM140192.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140194 | GPL201 |
|
Squamous Cell Carcinoma P4
|
Primary lung cancer samples
|
age: 73
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140194
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140194/suppl/GSM140194.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140195 | GPL201 |
|
Squamous Cell Carcinoma P5
|
Primary lung cancer samples
|
age: 56
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140195
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140195/suppl/GSM140195.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140196 | GPL201 |
|
Squamous Cell Carcinoma P6
|
Primary lung cancer samples
|
age: 69
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140196
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140196/suppl/GSM140196.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140197 | GPL201 |
|
Squamous Cell Carcinoma P7
|
Primary lung cancer samples
|
age: 45
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140197
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140197/suppl/GSM140197.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140198 | GPL201 |
|
Squamous Cell Carcinoma P8
|
Primary lung cancer samples
|
age: 73
gender: w
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140198
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140198/suppl/GSM140198.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140200 | GPL201 |
|
Squamous Cell Carcinoma P9
|
Primary lung cancer samples
|
age: 75
gender: m
disease: Squamous Cell Cancer
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140200
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140200/suppl/GSM140200.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140201 | GPL201 |
|
Squamous Cell Carcinoma P10
|
Primary lung cancer samples
|
age: 59
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: no
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140201
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140201/suppl/GSM140201.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140205 | GPL201 |
|
Primary lung cancer therapy T1
|
Primary lung cancer samples
|
age: 77
gender: m
disease:
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140205
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140205/suppl/GSM140205.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140207 | GPL201 |
|
Adenocarcinoma therapy T2
|
Primary lung cancer samples
|
age: 52
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140207
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140207/suppl/GSM140207.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140209 | GPL201 |
|
Adenocarcinoma therapy T3
|
Primary lung cancer samples
|
age: 62
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140209
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140209/suppl/GSM140209.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140211 | GPL201 |
|
Primary lung cancer therapy T4
|
Primary lung cancer samples
|
age: 66
gender: m
disease:
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140211
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140211/suppl/GSM140211.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140212 | GPL201 |
|
Adenocarcinoma therapy T5
|
Primary lung cancer samples
|
age: 48
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140212
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140212/suppl/GSM140212.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140214 | GPL201 |
|
Adenocarcinoma therapy T6
|
Primary lung cancer samples
|
age: 49
gender: w
disease: Adenocarcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140214
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140214/suppl/GSM140214.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140215 | GPL201 |
|
Adenocarcinoma therapy T7
|
Primary lung cancer samples
|
age: 69
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140215
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140215/suppl/GSM140215.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140216 | GPL201 |
|
Adenocarcinoma therapy T8
|
Primary lung cancer samples
|
age: 60
gender: m
disease: Adenocarcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140216
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140216/suppl/GSM140216.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140217 | GPL201 |
|
Squamous Cell Carcinoma therapy T9
|
Primary lung cancer samples
|
age: 74
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140217
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140217/suppl/GSM140217.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140218 | GPL201 |
|
Squamous Cell Carcinoma therapy T10
|
Primary lung cancer samples
|
age: 53
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140218
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140218/suppl/GSM140218.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140219 | GPL201 |
|
Squamous Cell Carcinoma therapy T11
|
Primary lung cancer samples
|
age: 53
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140219
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140219/suppl/GSM140219.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140220 | GPL201 |
|
Squamous Cell Carcinoma therapy T12
|
Primary lung cancer samples
|
age: 67
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140220
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140220/suppl/GSM140220.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
GSM140221 | GPL201 |
|
Squamous Cell Carcinoma therapy T13
|
Primary lung cancer samples
|
age: 58
gender: m
disease: Squamous Cell Carcinoma
received platinum-based therapy with progression: yes
|
Laser captured primary lung cancer cells
|
Sample_geo_accession | GSM140221
| Sample_status | Public on Nov 01 2006
| Sample_submission_date | Oct 16 2006
| Sample_last_update_date | Oct 27 2006
| Sample_type | RNA
| Sample_channel_count | 1
| Sample_organism_ch1 | Homo sapiens
| Sample_taxid_ch1 | 9606
| Sample_molecule_ch1 | total RNA
| Sample_extract_protocol_ch1 | RNA of LCM-tumor cells was extracted using the RNeasy Micro- Kit (Qiagen, Santa Clarita, CA, USA Cat. No. 74004). All buffers and solutions are part of the
| Sample_extract_protocol_ch1 | kit and were applied according to the manufacturer’s instructions.
| Sample_extract_protocol_ch1 | In brief:
| Sample_extract_protocol_ch1 | LCM tumor cells suspended in 350µl lysis buffer were incubated with 350µl 70% ethanol.
| Sample_extract_protocol_ch1 | 700µl suspension was put on RNeasy MinElute- column and spun down for one minute with 10,000 rpm.
| Sample_extract_protocol_ch1 | DNase- digestion (10µl DNase+70µl RDD buffer-> 80µl) for 15 at 30°C.
| Sample_extract_protocol_ch1 | 2 washing steps with 350µl RW1- buffer and 500µl RPE- buffer.
| Sample_extract_protocol_ch1 | 500µl of 80% ethanol were put on RNeasy MinElute- column and spun down for 2 minutes with 10,000 rpm.
| Sample_extract_protocol_ch1 | Removal of ethanol: column was spun down for 5 minutes with 30,000 rpm.
| Sample_extract_protocol_ch1 | Elution of RNA with 14µl of RNAse free water.
| Sample_extract_protocol_ch1 | Quality and quantity control of the RNA using a Agilent 2100 Bioanalyzer (Agilent Technologies, Palo Alto CA) and the NanoDrop ND-1000 (PeqLab Biotechnologie
| Sample_extract_protocol_ch1 | GmbH, Erlangen). Purified RNA was stored at -80°C.
| Sample_label_ch1 | Biotin/Streptavidin-PE
| Sample_label_protocol_ch1 | Amplification, reverse transcription and labelling of the sample.
| Sample_label_protocol_ch1 | For amplification of micro-dissected RNA, the MessageAmp™ aRNA Kit (Ambion, Austin, TX, USA) was used.
| Sample_label_protocol_ch1 | Between 200-500ng of isolated RNA were transcribed into cDNA.
| Sample_label_protocol_ch1 | First strand cDNA- Synthesis:
| Sample_label_protocol_ch1 | 11µl (RNA or RNA and dH2O) Sample
| Sample_label_protocol_ch1 | 1µl Oligo(dT)Primer
| Sample_label_protocol_ch1 | 70°C incubation for 10 minutes, put on ice and incubated with the reaction kit (stated below).
| Sample_label_protocol_ch1 | Reaction kit:
| Sample_label_protocol_ch1 | 2µl 10x First Strand Buffer
| Sample_label_protocol_ch1 | 1µl Ribonuclease Inhibitor
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | Adding 1µl Reverse transcriptase and 2 h incubation at 42°C
| Sample_label_protocol_ch1 | Second strand cDNA- Synthese:
| Sample_label_protocol_ch1 | 63µl Nuclease-free Water
| Sample_label_protocol_ch1 | 10µl 10x Second Strand Buffer
| Sample_label_protocol_ch1 | 4µl dNTP Mix
| Sample_label_protocol_ch1 | 1µl RNase H
| Sample_label_protocol_ch1 | For second strand sythesis 2µl der DNA- Polymerase are added followed by a 2 h incubation at 42°C.
| Sample_label_protocol_ch1 | Purification of cDNA:
| Sample_label_protocol_ch1 = Final elution volume | 16 µl and storage for 12 h at -20°C
| Sample_label_protocol_ch1 | Labelling with in vitro transcription using biotin labelled nucleotides:
| Sample_label_protocol_ch1 | Labeling mix:
| Sample_label_protocol_ch1 | 4µl biotinylated dNTPs (Bio Array High Yield RNA Transcript Labelling Kit, Enzo Life Sciences, Farmingdale)
| Sample_label_protocol_ch1 | 4µl T7 10x reaction buffer
| Sample_label_protocol_ch1 | 12µl RNase free water
| Sample_label_protocol_ch1 | The labelling mix is incubated with the sample and 4µl of the enzyme mix is added followed by an incubation period of 5 hours at 37°C. The amplified RNA is
| Sample_label_protocol_ch1 | purified and is eluted in a final volume of 96 µl.
| Sample_label_protocol_ch1 | Quality control of aRNA:
| Sample_label_protocol_ch1 | The concentration and purity of aRNA is measured using the NanoDrop ND-1000 (PeqLab Biotechnologie GmbH, Erlangen) measuring absorptions at 260 and 280nm
| Sample_label_protocol_ch1 | The OD 260/OD 280 aRNA was between 1.7 and 2. To exclude the possibility of degradation and/or contamination RNA was analyzed again using a Agilent 2100
| Sample_label_protocol_ch1 | Bioanalyzer (Agilent Technologies, Palo Alto CA).
| Sample_label_protocol_ch1 | Fragmentation:
| Sample_label_protocol_ch1 | For optimal hybridization with the complementary oligonucleodid sequences, a fragmentation of the amplified RNA was performed.
| Sample_label_protocol_ch1 | 24µl of the sample were added to 6µl of fragmentation buffer (200mM TRIS-Acetat, ph 8.2, 500mM KOAc, 150mM MgOAc, Affymetrix) and incubated at 94°C for 35
| Sample_label_protocol_ch1 | minutes.
| Sample_hyb_protocol | Arrays were prehybridizised for 10 minutes using 140µl MES- hybridization buffer (70,4g MES free acid monohydrate, 193.3g MES Sodium Salt, 800ml accugen
| Sample_hyb_protocol | water, pH 6.5 – 6.7) and 140µl aqua dest. at 45°C and 60rpm in the Gene Chip® Hybridizing oven 640 (Affymetrix).
| Sample_hyb_protocol | After removal of the pre-hybridizing solution, the array is loaded with 250 µl of the hybridizing solution (30µl fragmented aRNA, 5µl control-oligo B2, 15µl
| Sample_hyb_protocol | 20x Eukaryotic hybridizing control, 3µl salmon sperm-DNA, 3µl azetylic BSA, 150µl 2x MES- Hybridizing buffer and 94µl aqua dest.).
| Sample_hyb_protocol | Following 16-hour incubation at 45°C with permanent rotation, the hybridizing solution is removed.
| Sample_hyb_protocol | The array is loaded with 280µl of washing buffer A (300ml 20x SSPE, 1ml 10% Tween 20, 698ml accugen water) and a maximum of 4 hybridized arrays are put into
| Sample_hyb_protocol | the wash station ((Gene Chip® Fluidics, Affymetrix) with buffer A and buffer B (83.3ml 12x MES, 5.2ml 5M NaCl, 1ml 10% Tween 20, 910.5ml accugen water) using
| Sample_hyb_protocol = the washing protocol which is prescribed by Affymetrix (for Human Genome Focus Oligonukleotid- Arrays | Midi-euk2v3).
| Sample_hyb_protocol | During washing procedure the staining solution is prepared:
| Sample_hyb_protocol | Staining solution:
| Sample_hyb_protocol | 600µl 2x Staining Buffer
| Sample_hyb_protocol | 540µl dH2O
| Sample_hyb_protocol | 48µl BSA
| Sample_hyb_protocol | 12µl Streptavidine- Phycoerythrin- Conjugate
| Sample_hyb_protocol | Array is incubated with 600µl of the staining solution after washing for 40 minutes followed by incubation with the antibody solution for 10 minutes:
| Sample_hyb_protocol | Antibody solution:
| Sample_hyb_protocol | 300µl 2x Staining Buffer 266
| Sample_hyb_protocol | 4µl dH2O
| Sample_hyb_protocol | 24µl BSA
| Sample_hyb_protocol | 6µl Goat IgG
| Sample_hyb_protocol | 3.6µl biotinylated Anti- Streptavidin- AB
| Sample_hyb_protocol | After removal of the antibody solution 600µl of the staining solution is applied again for 10 minutes followed by removal of the staining solution and
| Sample_hyb_protocol | washing.
| Sample_scan_protocol | The scanning of the array is performed using a GeneArray® 2500 Scanner (Affymetrix, Software GCOS[GeneChip Operating System]). Excitation of the fluorochrome
| Sample_scan_protocol | phycoerythrin at a wave length of 488nm with an emission at 570nm.
| Sample_data_processing | Using the affy package of functions of statistical scripting language 'R' integrated into the Bioconductor project data from cel files of each sample were normalized by variance stabilizing transformations (VSN) Ref.: Huber W, von Heydebreck A, Sultmann H, et al. Bioinformatics 2002;18:96-104.
| Sample_platform_id | GPL201
| Sample_contact_name | Michael,,Rosskopf
| Sample_contact_department | Bioinformatics
| Sample_contact_institute | University of Duesseldorf
| Sample_contact_address | Universitaetsstrasse 1
| Sample_contact_city | Duesseldorf
| Sample_contact_zip/postal_code | 40225
| Sample_contact_country | Germany
| Sample_supplementary_file | ftp://ftp.ncbi.nlm.nih.gov/geo/samples/GSM140nnn/GSM140221/suppl/GSM140221.CEL.gz
| Sample_series_id | GSE6044
| Sample_data_row_count | 8793
| |
|
|
|
Make groups for comparisons |
(2 groups will be compared at a time) |
|
Select GSMs and click on "Add groups" |
Enter the group name here: |
|
|
|